Bowie Brain
A friendly microcontroller kit for intermediate robots, animatronics, and automation projectsWelcome to the Bowie Brain Kit!
Follow along with our instructions to solder your own robot brain, and get started with our example code libraries. The kit is compatible with Arduino, so you can leverage the entire community of existing code that’s available. There are plenty of connections for inputs and outputs to control actuators, indicators, read sensors, GPS, mesh communication, and more. There is soldering involved with this kit and some of it involves precise alignment.
Skill level: Intermediate.
Get the Kit
Get started with the Bowie Brain by purchasing the kit from our store. It will come with all the components, the board, the breakout boards, and the 3D printed enclosure!
See the Brain in Action!
Watch a Bowie brain surgery to see what you can do with your kit, how it gets put together, and some of the possible connections.
Photo Gallery
The Kit
The kit is suitable for beginners and intermediate robot builders. For beginners, you’ll be able to follow the instructions and it will stretch you (learning curves are a GOOD thing). It might take additional time. For intermediates, this kit will serve as a tool for you to investigate next levels or next generations of ideas you have for robots. If you’ve built an Arduino robot before, then this kit will be great for you to add additional capability to that robot.
Tools required (not included)
- Soldering iron
- Solder (your choice – lead free or leaded)
- Third hand tool
- Desolder wick braid, or desoldering tool (just in case there are mistakes along the way)
- Diagonal cutters
- Painters tape
- Screwdriver with bit kit
What’s included in the kit?
- Necessary resistors, diodes, LEDs
- Teensy 3.6
- Two current sensors
- Motor driver
- 3.3V voltage regulator, speaker
- Barrier block and screw terminals
- Connectors for the motors
- 3V coincell battery for RTC
- 3D printed enclosure
- Necessary fasteners
- * Note: The XBee is not included in this kit
Latest Developments
We are continuously developing, using robots to tackle environmental challenges
Tech Log #022: Lots – Mosquitto config, fifo bug, sha256, certbot, and browsers
It's been a jam-packed set of work sessions today to try to track down and figure out how to make this work. Following yesterday's trial and errors, the first thing to fix was making a new config for mosquitto. Then, regenerating the certificates, but this time with...
Tech Log #021: Running in a circle about ssl
A bit of running in a circle to get tls/ssl to work. It didn't work at first. Some of the issue was around the common name, and the lack of clarity about what that actually needs to be. Ran in to issues with the mosquitto config file not being updated, and trying to...
Tech Log #020: Secure websockets necessary
Since the AR view uses the camera, this means the connection has to be secure using ssl. MQTT was added to the AR code, but it can't communicate over websockets - it has to be secure websockets. The next step will be to generate certificates for the ssl connection.
3D Print Pieces
Check out the pieces – download and print these on your own or community printer!
Open Source Hardware
The Bowie Brain Board is open source, released under the CERN OHL v1.2 license. Check it out on Github.
Product Disclaimer
Customer support: If you run in to an issue, please submit a ticket via email to hello@robotmissions.org and we will try to help.
No liability: Robot Missions Inc. is not responsible or liable for any damages or injuries caused from our kit.
Return policy: Full refund for first 7 days, partial or no refund after that depending.